Originally Posted by TanDaMan
Just did mine too. Great product. I did leave the lug nuts in after I did the first side. If you don't it will peel when you torque down the lugs. Could be cuz I was limited on drying time. Patience and time helps.
Good point, this can be an issue particularly on the rear wheels because the sockets are so deep. If you don't have a long socket head you'll have to be very careful. Of course, if you do nick it you can just spray a little bit of dip onto a q-tip or sponge and touch it up.
(I'd suggest a true 17mm socket, not 11/16 like most places will sell you)