Vorshlag camber plates intalled on E92 M3 w/EDC
As promised I was able to have Vorshlag's new camber plates for OEM springs installed on my E92 M3 w/EDC. The installation was done by Driver's Source in Houston and they did a great job. I was not able to have alignment done, but will do so this weekend or early next week. The ride quality with plates installed is the same as stock, but with a tighter steering feel due to precision of the Vorshlag plates. I did not notice any noise when going over bumps and I am really impressed with the ride so far. I did notice a slight ride height increase of approx 6-8 mm with the plates installed. Since the plate is installed entirely below strut tower, the EDC plug and cap fitment is not affected. I will also post track impressions next weekend following the TWS DE. I wil be running R-S3's 275 square with -2.5F/-2.0R and 10mm spacer on rear.
Akra GT4 / MS Stage 2 / MS UDP / BPM Tune / KW CS / TMS Delrin / ST 380/355 BBK / Cantrell 2.5" Ducts / SR34 Pads / Apex Arc-8 / Hoosier R7's / Mode GT4 Splitter / GT4 Canards / APR GT-250 Wing / Cantrell Half Cage / Recaro Profi / Schroth Profi II-6 / BMW Alcantera Wheel / Cool Shirt / ESS Fire / Aim Solo DL
Last edited by ortho281; 10-11-2012 at 10:21 PM.