View Single Post
      10-09-2012, 07:39 PM   #1
OerdingE93
Lieutenant
OerdingE93's Avatar
United_States
8
Rep
502
Posts

 
Drives: 2011 Mineral White E93 M3 DCT
Join Date: Sep 2011
Location: LA/OC

iTrader: (3)

DIY: E93 Valentine 1 Hardwire

So i have finally decided to order the hard wire kit from valentine1.com. I havn't seen a E93 V1 installation DIY, so i thought i would help fellow Vert owners by posting this thread. Initially i was going to pay to have it done (not usually into messing w/ wires on a 80k car) until i came across a review i found through Google. I won't attempt to plagiarize this review so click the link below for further instruction. The installation took me about 20mn and was a complete breeze. I would recommend using extra zip ties to cleanly hide the wires around the dome light like i did. Before reading this review i thought i was going to have to run the phone cable all the way to the glove box, but no you use the dome light right next to where you position the v1. good luck

http://www.safeer.us/?p=281

__________________

|ESS VT1-550 510whp|MRF MID|AKRA REAR|CKS COILS|FORGESTAR|CSL TRUNK|GT4 Lip|3D-DESIGN