View Single Post
      10-04-2012, 10:39 AM   #1
GTM_Challenge
BimmerPost Supporting Vendor

 
GTM_Challenge's Avatar
 
Drives: E92 M3,X5M,F30 335
Join Date: Jan 2010
Location: Chicago

Posts: 2,464
iTrader: (7)

Send a message via AIM to GTM_Challenge
Macht Schnell Competition Wheel Spacers and Stud Conversion Kits

Free shipping on all Wheel Spacers and Lug Conversion Kits

Macht Schnell Competition Wheel Spacers

In order to give your BMW a much more aggressive stance while increasing handling, we offer our line of Macht Schnell Competition Spacer Kits.

Machined from 6061-T6 aerospace aluminum, these adapters are strong as well as lightweight to limit unsprung/reciprocating weight for maximum performance on or off the track. Spacer edges are also chamfered to allow for easy installation/removal if needed. After machining, the spacers are then anodized for additional strength, anti-corrosion & wear resistance.

A wider track stance increases lateral stability as well as giving your BMW a much more aggressive appearance after installation. Spacers also are used to correct wheel gap normally seen on otherwise stock suspension setups, pushing the wheels outward - filling the fenders.

Included with our Competition Wheel Spacer Kits are a full set of extended lug bolts. All wheel fasteners are hardened and tempered to strength class 10.9 or 10 according to DIN/ISO standard 898 and meet the statutory requirements of all countries - including the US.

Competition Wheel Spacer kit Features:
- Machined from 6061-T6 aerospace aluminum
- Chamfered edges allows installation & removal quick and easy
- Black anodized finish for additional strength and corrosion/wear resistance
- Improve handling by reducing body roll with a wider wheel base
- Included zinc plated corrosion-resistant wheel fasteners

Competition Wheel Spacer kit Contents:
- (2) 3mm Competition Wheel Spacers
- (10) extended-length zinc plated coated wheel fasteners

Macht Schnell 3mm Competition Spacer Kit



Macht Schnell 5mm Competition Spacer Kit



Macht Schnell 10mm Competition Spacer Kit



Macht Schnell 12mm Competition Spacer Kit



Macht Schnell 15mm Competition Spacer Kit



Macht Schnell 18mm Competition Spacer Kit



Macht Schnell 20mm Competition Spacer Kit









Macht Schnell Competition Stud Conversion Kit

All Macht Schnell Competition fasteners are hardened and tempered to strength class 10.9 or 10 according to DIN/ISO standard 898. They meet the statutory requirements of all countries - including the USA.

All studs/nuts feature a black plating process for OEM appearance.

Final inspections are not restricted to random quality checks. Every single fastener is tested to ensure compliance with specifications. Studs/nuts are also offered individually and should be replaced after every race season.

Competition Wheel Stud Kit Features:
- 45mm length allows for the use of close-ended lugs & locks (Note: cannot be used with any spacer)
- 75mm length allows for most spacer thicknesses (up to +12mm) to be used without changing studs
- 90mm length allows for spacer thicknesses (up to +20mm) to be used without changing studs
- 10.9 Grade Strength Class for ultimate strength and safety
- Bullet Tip prevents cross-threading (except for 45mm length)
- Faster and easier wheel changes
- Eliminates the need for balancing the wheel while threading in stock wheel lugs
- Black zinc coating for additional strength and corrosion/wear resistance
- Allen key insert for easy installation
- Fits most BMW models

Specifications:
45mm, 75mm or 90mm Shank, 12mm x 1.5, 17mm Hex Nut, Cone Seat

Macht Schnell Competition Stud Conversion Kit



We accept Visa, Mastercard, and Paypal


Please PM or email us (austin@gtmotoring.com) for any questions

Last edited by GTM_Challenge; 10-04-2012 at 10:46 AM.
GTM_Challenge is offline   United_States
0
Reply With Quote