Originally Posted by VictorH
What's available and what's not is a little confusing in this thread.
1) Adjustable camber plates for the stock suspension with stock springs are not available and you would not want them since they would raise the front end significantly (per email from Jay 2 months ago).
Since its a relatively new thread and it may not be off topic. I will be purchasing a set of GC EDC Stock suspended car Camber Plates.
Bimmerworld lists them as:
Ground Control Street Adjustable Camber Plates
Select Model: E9X M3, 1M; Select Spring: Stock Type (Strut Brand & Model*: FOR EDC CAR.)
Now can anyone confirm if it will RAISE the front end significantly as stated above? If so, I would need to find a solution to procure a set of aftermarket springs. I want to do this job once than to install, figure out the front end is higher then purchase springs and E36 M3 bump stops.
My impression was that the kit was identical to height as the stock spring hats meaning no reduction/increase in ride height.