View Single Post
      09-05-2012, 11:44 AM   #11
New Member

Drives: aw e92 m3
Join Date: Mar 2010
Location: N/A

iTrader: (1)

Breaker bar and pb blaster did the trick. Thanks again for everyone's help. Got the passenger rear on but ran into a clearance issue with my wheel, Morr vs8.2. The caliper mounting bolts just touch the surface to create a circular mark on the inside barrel. Upset to say the least when these are suppose to clear the 380mm kit. I saw swamp had a similar issue with his RACs. Should I grind down the heads, look for alternate bolts with smaller heads, or worse case get new wheels?