View Single Post
      09-03-2012, 10:37 PM   #1
New Member

Drives: aw e92 m3
Join Date: Mar 2010
Location: N/A

iTrader: (1)

Question Stuck Caliper Bolts???

I'm trying to install my brembo bbk but ran into an issue with the 2 caliper bolts holding the stock calipers on. I've hit them both with penetrating oil but they won't budge at all. I've tried to hitting the heads of the bolts with a hammer to try and loosen the corrosion but no dice in getting them to break free. Any suggestions on the best way to get these free? Also, these are not reverse threaded, correct? I want to make sure that I'm trying to loosen in the right direction so you never know.