View Single Post
      09-03-2012, 12:09 AM   #14
ortho281
Captain
 
ortho281's Avatar
 
Drives: 2011 E92 M3 6MT
Join Date: Aug 2010
Location: Katy, TX

Posts: 646
iTrader: (0)

Thanks for the inputs, yes my 18x10ET25 square setup did not require spacer on fronts to clear strut. I thought the fronts stuck out much more than rears, and so placed the 10mm spacers on back instead. I have two track days on new setup and no problems to report. I'm running 35-38psi hot with -1.6 camber up front. I am planning to use the new Vorshlag camber plates as soon as they are available.
__________________

Akra Evo / MS stage 2 / MS UDP / VF Tune / KW S/O springs / Vorshlag plates / ST 380/355 BBK / ST SR34 pads / Apex Arc-8 / Nitto NT01 / Cantrell Motorsports roll cage / Recaro Profi / Schroth Profi II-6 / BMW Performance Alcantera wheel

Last edited by ortho281; 09-03-2012 at 09:29 AM.
ortho281 is offline   United_States
0
Reply With Quote