View Single Post
      08-29-2012, 10:58 AM   #1
Will@P
Lieutenant
United_States
6
Rep
456
Posts

 
Drives: M5
Join Date: May 2012
Location: Sanford, FL.

iTrader: (0)

Performance Race Solutions - VF Engineering E9X M3 Superchargers East Coast FL Dealer

Proud to announce that we are a VF Engineering dealer for the east coast in Florida!


VF-Engineering chose to supercharge the BMW E92 M3 to add to already superior throttle response and give wild mid-to-top end power (sport mode) with the centrifugal Vortech V3-SQ supercharger. Maintaining the original BMW quality, smoothness and reliability were the key factors in the VF design. This is where the VF in house software comes into full play. VF have harnessed reliability of Vortech superchargers and quality of VF custom software with their 10 years of supercharging experience and worldwide OEM supply contacts to create the ultimate supercharger system for the ultimate driving machine.






Key Features


1. The VF system provides the power figures after hard driving or sitting in hot traffic due to their advanced cooling and design around the Vortech V3 and factory grade bar and plate heat exchangers with more densely packed fins and higher surface area.

2. The quality of VF products is far superior to anything available...We offer the thickest bracketry and hardware available designed by the latest manufacturing technology.

3. VF is the only company who took the time to research and design a product that has led to 0 failed engines. Rather than trying to get their first, VF released the product only when it was fully complete. Speaking of manifolds.. The VF system stands out above the rest because they use the largest intercooler inside our high capacity intake manifold which is also the largest on the market. The manifold design contains several technically advanced features which other companies do not (as we have studied their current versions) such as 3" velocity stacked tapered intake runners which increase air velocity prior to entering throttle bodies, dual dividers inside manifold to split air evenly between both bank 1 and 2. The hardware quality and finish is superior in all aspects and you can see this if you put both kits side by side. The supercharger unit we use is capable of 800hp and the injectors and cooling system is capable of almost the same. Our supercharger kit is also the most aesthetically pleasing design on the market.




Models Available:

VF540 $8295

540 hp / 370 ft/lbs
4.0-4.5 PSI
V3-SQ supercharger
Cast manifold(non-cooled)
ECU software flash (OBD Flash)


VF620 $13,495

625 hp / 400 ft/lbs
6.0-6.5 PSI
V3-SQ supercharger
Cast manifold(cooled)
ECU software flash (OBD Flash)


VF650 $16,495

650 hp / 420 ft/lbs
7.5-8.0 PSI
V3-SQ supercharger
Cast manifold(cooled)
ECU software flash (OBD Flash)
Requires 93 Octane and Full Sport Exhaust System
__________________________________________________

Location/Install Center:
Performance Race Solutions
4150 St. Johns Pkwy. Suite 1000
Sanford, FL. 32771

Contact Info:
Tel: 407.878.5870
Fax: 407.878.5871
Email: Will@Performanceracesolutions.com

Hours of Operation:
Mon-Fri 9am-6pm
Sat. by Appointment Only

Website:
www.performanceracesolutions.com


Installation is available at our facility which is equipped with a Mustang MD 500 AWD Dyno, Tuner, Alignment Rack, Full Engine Machine Shop, and Fabrication.

All VF Supercharger installs will include before and after dyno pulls.


PM or call us for pricing!!!

Last edited by Will@P; 11-01-2012 at 12:06 PM.