Originally Posted by RBB
Did the install this weekend using this guide and it turned out perfect. Hardest part was removing all the adhesive left over from the OEM spoiler. Heating it up with a hairdryer and scraping a big ball of it off with a plastic razor blade followed by 3M adhesive remover to get the remains worked well for me. Also, do a dry fitting and tape up the edges of the performance spoiler and trunk with painter's tape. Makes it easy to line up and catches a lot of the betalink.
Painters tape is a must to take of the excess adhesive of the Beta Link once it spreads out from the rear deck spoiler.