you can mount finger tight if you want but the accurate spec is 88 and if you dont use a torque wrench you wont get it right and could get wobble at speed. you have an m3 so invest the 100 bucks on one.
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings & bearings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW race|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs|