Originally Posted by crashoverride
Can you just do one corner at a time or why is it needed to put all four corners on stands and have all wheels removed at same time?
Changing the lines you can do one corner at a time but having the car up off all 4 wheels makes it much easier to bleed after. Otherwise, you have to go back around and lift each corner to bleed it and since I did it in multiple passes, that's that many more times you need to jack up each corner.
If you do one corner at a time, take note that both the connections for the rear mid lines are on the drivers side of the car so you would do all of that with the driver's side rear wheel off.