View Single Post
      07-05-2012, 09:43 AM   #1
Sean05
Putcha ang ganda...
 
Sean05's Avatar
 
Drives: 08 MR E92 M3
Join Date: Feb 2010
Location: Los Angeles, Brea CA.

Posts: 5,287
iTrader: (9)

Send a message via Yahoo to Sean05
Arrow DIY: Differential Fluid Change

I will make this plain and simple...

Things you need.

3 500ml OF DIFF FLUID +FM BOOSTER PART#83 22 2 282 583
14mm HEX socket
Small Torque wrench.
JACK and Jack Stand
towels
oil pan...

STEPS....

1. JACK THE CAR AND PUT THE JACK STAND.


2. UNBOLT THE TOP BOLT FIRST (FILL BOLT)


3. AFTER TAKING THE FILL BOLT OUT TAKE THE ONE BELOW. (SORRY NO PHOTOS OF THAT... BUT YOU CAN SEE ON THE 2ND PHOTO THE 2ND DRAIN BOLT. Make sure you have the oil pan cause it will drip even taking the fill in bolt out...

4. LET IT DRAIN, MAKE SURE ITS LEVEL AND WHEN IT STOPPED DRIPPING PUT THE DRAIN BOLT BACK IN


5. NOW ONCE YOU HAVE DONE STEP 4 YOU WILL NEED AT LEAST 2 1/2 OF DIFF FLUID. (THE ONE ON THE left)


6. THEN YOU HAVE TO SQUEEZE THE BOTTLE CAUSE ITS PRETTY THICK..(DO THIS YOU WILL ONLY NEED 2 1/2 BOTTLES. I HAD 1/2 OF 500ml LEFT...


7. AFTER YOU PUT 2 1/2 KEEP THE FILL IN BOLT OPEN AND LET THE EXCESS OIL DRIP...MAKE SURE TO LOWER THE CAR SLOWLY IF YOUR JACKING THE CAR ON THE RIGHT SIDE (PASSENGER)



8. ONCE IT STOP, SLOWLY JACK THE CAR UP AND PUT THE FILL IN BOLT.

9.. DONE... DRIVE IT AND DONT GUN IT... I SUGGEST TO DRIVE IT FOR AT LEAST 5-10 MILES AT LOW RPM...
Sean05 is offline   Philippines
0
Reply With Quote