View Single Post
      06-27-2012, 07:27 PM   #166
BimmerPost Supporting Vendor
Malek@MRF's Avatar

Drives: E92 M3, 991 P-Car
Join Date: Jan 2008
Location: Irvine, California

iTrader: (5)

Send a message via AIM to Malek@MRF
If you want to obtain maximum concavity front and rear (given that the 10" & 10.5" have the same profile), ideally you would run a 19x10 ET 23 front with a 275-30-19 tire, and for the rear a 19x10 ET10 with a 275-30-19.

Yes, square tire sizes, square widths, different offsets. This way you can achieve maximal concavity on the front and rear and do not need to run spacers.

If you want the front and rear concavity and wheel to be completely identical, then a 19x10 ET23 will do, followed by a 12mm spacer in the rear to flush it out.


BMW PERFORMANCE SPECIALISTS. Race Engines. Suspension. F/I. Brakes. Race Preparation. Factory Service. Alignments.
OFFICIAL PARTNERS: KW. MOTON. Brembo. AP Racing. BBS Motorsport. iND. HRE. Turner Motorsport. VAC. BMW Motorsport.
Facebook | Instagram | Yelp! | Flikr | Contact | YouTube