View Single Post
      05-30-2012, 12:06 PM   #11
ssabripo's Avatar

Drives: camels & donkeys
Join Date: Jul 2005
Location: Plantation, Fl

iTrader: (7)

Send a message via AIM to ssabripo
Originally Posted by paradocs98 View Post
I've run the stock ZCP wheels with 12.5mm Turner spacers all around with Blizzak LM60s mounted (255/35-19 front, 275/35-19 rear) with no rubbing. However, that same setup with the ZCP wheels w Turner spacers and the OEM PZeros (245/35-19 front, 265/35-19 rear) did rub in the rear on dips and bumps. Maybe the Pirellis are relatively wide and/or have a square shoulder?
that's my worry, but I guess we'll see soon

I'm on OEM 245/265 conti's with the ZCP wheels, and running 15/10mm spacers without issues whatsoever...heck I've taken long trips with the car LOADED, and not a single rub. Looking at the clearance, it would seem that the 275 "should" fit without issues.

If it ends up rubbing, I'll change the spacer in the rear from 10mm to 8mm, which should be enough in case of rubbing.

__________________________________________________ ____________
F80 M3 Mineral Grey/Sakir Orange, Exc, DCT... ED 6/2015
**SOLD**e90 M3, Interlagos Blue / M individual two-tone, ZCP, ZP2, ZCV, DCT, ED.