View Single Post
      05-23-2012, 01:23 AM   #1
vividracing
BimmerPost Supporting Vendor

 
vividracing's Avatar
 
Drives: 2011 BMW M3 DCT
Join Date: Aug 2006
Location: Arizona

Posts: 3,512
iTrader: (13)

Send a message via AIM to vividracing
Vivid Racing: Alcon Big Brake Kit...Exclusive Member Pricing

Vivid Racing is now an authorized distributor of Alcon Brakes... We are giving our members exclusive rates at this time.. We will carry their full line of Big Brake Kits so even if its not for an M3 don't hesitate to ask. Pm me or Call 480-966-3040 Ext 231 for member pricing...


$5500 Shipped any where in the lower 48

Calipers:
Front caliper is a 6 piston monobloc machined from a single forged piece
Rear caliper is a 4 piston monobloc also machined from a single forged piece
Combing front and rear calipers offers a more positive responsive pedal as a result of improved caliper and system stiffness
Increased pad area and volume offers better temperature management and improved brake efficiency
Pagid RS9-2 high performance road friction material offers maximum performance over a wider temperature range
Piston position designed to offer most even pad wear
Caliper specification designed to improve overall system efficiency whilst maintaining the original balance and OEM actuation.
Rotors:
384x34mm front rotors and 370x30mm rear rotors offer significant improvements in available brake torque.
Alcon rotors are incredibly lighter then the OEM rotors resuling in reduced inertia.
Increased thermal capacity
Utilises Alcon's unique Turbulator casting for maximum cooling efficiency.
Features Alcon bespoke floating drive system.
Cresent groove pattern allows for improved gas release, increased initial bite, and improved durability.
Rear disk and bell assembly invorporate OEM "drum in hat" handbrake configuration.


Alcon Superkit Big Brake Kit 6 Piston Front & 4 Piston Rear BMW E90/92 M3 08-11 MSRP:$8,765




Alcon Advantage Extreme Brake Kit Front Mono4 BMW E90/92 3-Series incl M3 08-11 MSRP$3,743

Calipers:
Advantage Extreme calipers are gravity die cast monobloc constructions using aluminum alloy for optimum strength and weight.
Steel pistons with nickel plated finish for durability to achieve a corrosion resistant surface.
To protect against the elements nitrile rubber wiper seals are installed in the caliper bores out board of the EPDM pressure seals. The design is more effective in high performance applications than external boots that can get damaged being in contact with a hot brake pad.
Piston bore sizes are staggered to ensure even pad wear





__________________

480.966.3040 Ext: 236
Call and ask for Anthony for quotes and special M3post pricing!

Anthony@VividRacing.com

Last edited by vividracing; 02-14-2013 at 06:06 PM.
vividracing is offline   United_States
0
Reply With Quote