Thread: Rubbing issues
View Single Post
      05-18-2012, 08:55 AM   #7
///M 4 Life
///M 4 Life's Avatar

Drives: 2014 ///M6 CP
Join Date: Oct 2009
Location: Central Jersey

iTrader: (0)

Originally Posted by YouW1n View Post
I ran into the same problem while running 15mm spacers in the rear. I also lowered the car with H&R springs and the car itself was a ZCP model.

It rubbed on bumps but that was enough to concern me because my rear fender sticks "slightly" out a little more now. I switched the rear to 12mm spacers and after that there was no more rubbing! I was aware that I could have tried to roll my fenders but I just didn't want to go that route to reduce my cars value if i trade in.

As far as looks goes... the 15mm definitely looks better... it was pretty surprising for me to see that the 3mm made a difference to me. Nevertheless... it feels a lot better to be able to drive without having to worry about rubbing!!
I agree I like the way the 15's look but for now I'm just gonna take them off completely for now till i get anither set cause it is very annoying to be worrying about the car rubbing on every bump in the road.