View Single Post
      05-06-2012, 04:05 AM   #12
1sikbmr
Brigadier General
43

 
1sikbmr's Avatar
 
Drives: E90 M3 6MT
Join Date: Mar 2010
Location: New York


Posts: 3,283
iTrader: (14)

Quote:
Originally Posted by Dave07997S View Post
What??? I run 255/35/19 no issues on ZCP wheels. You can run a 275 on a 19X10 ET25 wheel and it doesn't rub. Issue is the tire is to tall. Its 26.1" thats the issue.

To the OP the rub is on the fender liner, with time it will just eat away at the part it rubs. You can also try a heat gun to soften it and push it in a tad. Also, why did you mount the wheels? You should have sent them back as soon as you realize you got a 8.5" width wheel when you were expecting a 9" wheel.

The issue
Ok you are running 255 on zcp. what offsets? any spacers? are you dropped? im assuming OP is rubbing in two areas which would be the fender when fully locked and the fender liner when turning. He is slammed which I'm sure you are not. I stand by my 245.

Im running 245/35/19 up front with a 19x9.5 et22 no rubbing, no drop, no zcp. you raise the wheel diameter and drop the tire height so from 245/35/19 you go to 245/30/20. so it should not rub. This is still assuming op has proper offsets up front.
__________________

E90 ///M3 6MT Atlantis Blue - Fox red #TEAMMODE
ESS VT1-550|Volk TE37|Recaro|STOPTECH|Ohlins R/T|Mode Carbon GT4 Lip|Umnitza V4 |Agency Power/Sosi/ACM Test Pipes|BMW PSW V1|