Originally Posted by aresh
how is it wired? are you using technics harness? Make sure that when your getting the signal from the subs underneath that you only use the signal of one sub and not both!. This isnt mentioned and i had to figure this out the hard way. Instead of 4 wries going into the lc2i there should be a left neg and right positive from only one speaker. HOPE this helps
Say WHAT? My line input has 4 wires going into it!
Yes I have Technics harness.
My 12v comes off the amps power line.
Remote comes off the thin black wire behind the passenger seat
My ground is off the amp, which is grounded to the ground location in the rear passanger fender well, where other stuff is grounded.