View Single Post
      03-23-2012, 10:59 AM   #108
Drives: E90 M3
Join Date: Sep 2009
Location: SoCal

Posts: 603
iTrader: (1)

Originally Posted by e92zero View Post
Reporting back. Finally got to work on this. As pointed out by the posters above, the 2 nuts for the exhaust hangers do not support the diff.

I have to remove the exhaust and the heat shield to get solid contact on the 2 bolts from the front. They were definitely under torqued and not at 100 NM. Should be good now though. Thank you guys for all the information and knowledge.
So does installing an aftermarket exhaust by removing those two nuts (rather than removing the exhaust from the rubber hangers) have any effect on this as many have thought?
infantrytroop22 is offline  
Reply With Quote