View Single Post
      03-07-2012, 11:27 AM   #126
Lieutenant General
Technic's Avatar

Drives: 2015 320i
Join Date: Apr 2005
Location: Ft Lauderdale, Florida

iTrader: (18)

Originally Posted by alpina527 View Post
Thanks Technic. I was thinking perhaps that if I ran one stock sub via the conventional right channel through the premium amp It would be adjustable from the oem analyser.

The left channel could run via the 400/4 to give more low down bass which could be adjusted to a certain degree on the amp.

I was thinking this might fill to mid bass hole to some degree. Would I notice the stereo separation on the bass notes? I'm not sure.

Can I run the oem subs through the 400/4 with a 7 ohm rating? If so, I will give it a try
The only way to know is to try it. Make it happen.