View Single Post
      01-08-2012, 10:43 PM   #107
Drives: 2011 E92 BW
Join Date: May 2010
Location: somewhere in US

Posts: 540
iTrader: (0)

Reporting back. Finally got to work on this. As pointed out by the posters above, the 2 nuts for the exhaust hangers do not support the diff.

I have to remove the exhaust and the heat shield to get solid contact on the 2 bolts from the front. They were definitely under torqued and not at 100 NM. Should be good now though. Thank you guys for all the information and knowledge.
e92zero is offline  
Reply With Quote