Thread: JRZ Suspension
View Single Post
      12-21-2011, 11:35 AM   #24
VSmotorsports
Lieutenant Colonel
 
VSmotorsports's Avatar
 
Drives: e92 M3
Join Date: Apr 2010
Location: Schaumburg, IL

Posts: 1,633
iTrader: (3)

Send a message via AIM to VSmotorsports
Quote:
Originally Posted by STALKER View Post
Would they work with Vorshlag plates and swift springs for our application? At this point Im leaning towards an Ohlins set up when they release it in spring, but this could def be a great alternative if we can get some more feedback.

These look extremely promising.
If you are having them built to use the stock style springs the typical 2.25 inch spring won't work. Since the strut on the front would be different. On our set and the link posted to the 1M there is the ring you can see welded to the strut body. That is to hold the stock spring perch in place, and you get the perch from the stock strut.

If you are doing a normal coilover kit from JRZ the shock body is usually threaded. So if you wanted to do a swift set up you would want the standard design set up and not one made to use the stock spring size.

Ohlins is also a great set up. We had a chance to talk with them a bit at the PRI show. Were you looking at there Road&Track set up? Just assuming that since the TTX series is out but that is more of a race only suspension.
VSmotorsports is offline  
0
Reply With Quote