View Single Post
      11-26-2011, 10:02 PM   #444
M3SQRD's Avatar

Drives: E92 M3,R56 S,F22 240iX,F82 M4
Join Date: Jun 2009
Location: EC

iTrader: (10)

Originally Posted by Dodge2Dub View Post
I read through the entire thread and couldn't find a decisive answer to my question below. I am running B&G springs and spacers (15mm front and 12mm rear) on the 220M rims. Will I have any rubbing issues if I opt for the 255/275 PSS'?
The shoulder on the PSS is a little bit more square than the PS2 but not as bad as the AD08. If you use a 275/35 rear the diameter will be slightly larger than the stock diameter of 26.3". With these differences in the PSS, along with the increased width, you might run into a rubbing problem on the rear with a 12 mm spacer; however, without the spacer I doubt you'd have a problem. On the front, if you have a rubbing problem with the 15 mm spacer you could switch to either a 10 or 12 mm spacer and solve the rubbing issue.

I plan on running 255/35 and 285/30 PSS in the spring on zcp wheels - zcp wheels are wider and have a slightly more aggressive offset and this will work without rubbing (I'm not using spacers).