^elp_jc. I believe zba posted on page 2 that the torque spec is 47 lb/ft. I don't plan on loosening them up first and retightening them. I should be able to just set my torque wrench to 47 lb/ft and see if the nut moves first or my wrench clicks first. If the nut moves first, that should be a good indicator that it's not up to spec. If the wrench clicks without the nut moving, then it's 47 lb/ft or more and I will just leave it as that. I am just concern that the nuts loosen up over time. Anyone want to charm in if the above is not a good idea?
^Kmarei, that is correct.