View Single Post
      11-03-2011, 09:26 PM   #27
2016 Track Days - 3| Ridge 1:52:24|Pacific 1:33:30
1MOREMOD's Avatar

Drives: Race car->
Join Date: Mar 2009
Location: check your mirrors

iTrader: (5)

Originally Posted by aus View Post
Great job. Thanks.
Any pics of the tubing from the under tray to the fender liner? Was that short run in the pic all you needed?
yep its a pretty short piece needed. i used about 1 and a 1/2 feet long or so but the distance is shorter than that just the turns in there wanted a little extra. if you look at the picture of the undertray the tubing exit in the fender liner is just passed the point where it passes through the hangers. the lower bolt in the fender well goes in the inner most tab on the undertray in that picture.

02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs|