View Single Post
      10-21-2011, 03:46 PM   #10
HP Autosport
BimmerPost Supporting Vendor

 
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, Brembo, GIAC, Koni, Ohlins, Performance Friction, Quaife, Stoptech, Vorshlag

Posts: 11,261
iTrader: (29)

HPA E9x M Series Rear Ride Height Adjusters

This has been very popular on the E90post.com and 1addicts.com forums for adding addition height to existing rear coil over system using 60mm ID springs.

A pair of adjustable height rear spring platforms, designed to work with 60mm inner diameter coilover rear springs mounted in the stock spring location at the rear of a BMW E82 1M or E9x M3. These are high quality products made by HPA right here in the USA, with easy adjustments. The thread used is self locking once any load is applied.

The material for the rest of the assembly is made up of black and HPA blue anodized aircraft grade aluminum alloy. These can be adjusted from a minimum of 0.5" thick to a maximum of 2.75" thick. These can be adjusted independently of each other and is great for corner balancing of your BMW.

This particular model has been optimized to run at the top of the spring on the back of a BMW E8x/E9x. The locating stub fits in the factory location and replaces the bulky factory locating stub/hat, which inhibits ride height adjustment with other similar rear ride height adjusters.
Attached Images
 
HP Autosport is offline   United_States
0
Reply With Quote