View Single Post
      10-13-2011, 05:28 PM   #12
1MOREMOD
2014 Track Days - 11|Ridge 1:52:24|Pacific 1:35:72
1MOREMOD's Avatar
United_States
173
Rep
12,998
Posts

 
Drives: Race car->
Join Date: Mar 2009
Location: check your mirrors

iTrader: (5)

Quote:
Originally Posted by 540gone View Post
What thickness spacers F & R are you using. I assume they are different if you are getting a different amount of stud projection. It looks like the front fitment in the picture is about the thickest spacer that can be used with the 75mm studs. TIA.
i have a 15 front and 12 rear MS spacers for my stock wheels and use only the rear spacer when on my track set. the 75mm kit is supposed to be used with a max of 12.5mm spacer but did some measuring with a caliper gauge to make sure this would work. the front nuts make contact with the stud up until the last thread on the outside of the nut so i have lots of contact with the stud. the rear fully threads the nut.
__________________

02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs|