View Single Post
      09-13-2011, 02:24 PM   #2
BimmerPost Supporting Vendor
Bart@AUTOcouture's Avatar

Drives: X5 | M3 | X5M | S63 | Raptor
Join Date: Feb 2006
Location: Fort Lauderdale, FL

iTrader: (4)

Send a message via AIM to Bart@AUTOcouture
Few pics of some mods that made it here before the car.

-- UPDATE: 9/14/11 - Took delivery

-- UPDATE: 9/17/11 - BBS CH, KW sleeves

-- UPDATE: 9/27/11

-- UPDATE: 10/1/11 MAGNAFLOW rear section, 19" BBS LM

-- UPDATE: 10/10/11 Night shoot teaser

-- UPDATE: 10/25/11 Couple fall pics courtesy of MP Media

-- UPDATE: 11/11/11 OEM Modded exhaust

Read a few threads about this and wanted to try it out. There's a few ways people have modded these. Some just pulled out the stuffing in the middle can and wrapped the perforated pipes. Others welded in pipes in place of the perforated ones. We went with another method. Pictures below.

This is what the left and right cans look like inside if you've never seen them. They criss-cross thru the center of the muffler.

We cut out the pipes and re-directed the Y-pipe straight thru bypassing the center of the can.

Last step is to weld on the titanium tips and throw it on the car..

Painted it black..


-- UPDATE: 11/18/11 OEM Performance Wheel V2 and Test Pipes

-- UPDATE: 12/17/11 Test Pipes installed

Turner test pipes installed yesterday. Here's a quick vid:

-- UPDATE: 2/6/12 19x10 ZCP ( style )wheels

Few iPhone pics:

Last edited by Bart@AUTOcouture; 02-06-2012 at 04:56 PM.