View Single Post
      08-08-2011, 01:13 AM   #4
///m3d
Captain
///m3d's Avatar
142
Rep
877
Posts

Drives: E82 1M3 Clone 2.0 StreetClone
Join Date: May 2011
Location: California

iTrader: (2)

I used zaino products. I did an initial wash with Dawn to remove anything that was on the car before hand. Then I did a clay bar over the entire car to remove as much of the more aggressive stuff as I could. I then did another was with the Z7 wash. Dried the car and began on the Z5 polish. After the Z5 I put down some Z6 and moved onto the Z2 polish. Once done there I put down another Z6 coat. I think that about sums it up... It took about 5 hours including cure times.

I know the garage shots where not very useful which is why I tried to do some in direct light. I am all for tips on how to better capture the results on a camera so the experts can make suggestions!
__________________
Current: 1///M3 Clone 2.0 - The Build Log, 2009 E90 ///M3 - JB | BLK | SPEED CLOTH | SLICKTOP | 6MT
Previous: 2005 E46 ///M3 - IB | M CLOTH, 1999 E36 ///M3/2/5 DINAN S3 - Estoril | BLK, 1999 E36 ///M3/2/5 - TiAg | BLK, 1998 E36 ///M3/4/5 - Estoril | BLK, 2005 E46 ///M3 - SG | CIN, 2002 E39 ///M5 - TiAg | BLK, 2010 E92 ///M3 - LMB | BLK, 2008 E90 ///M3 - IB | BLK, 2006 E46 ///M3 - IR | CIN